Load Pins provide simple replacement for existing shear pins, clevis pins, shackle pins, shear axles or other types of pinned joints.
Load Pins are made of High Strength Stainless Steel and provide precision measurement of applied radial shear forces at both ends of a clevis eye, rod eye, or shackle opening. Strain gages installations are bonded and sealed deep inside a small hole along the longitudinal axis allowing for immunity to harsh environments. Proper alignment using anti-rotation devices, allow for direct force measurement. Combined error due to repeatability and non-linearity of less than 1% of rated load, typical.
Strainsert offers a custom Load Pin configurator to allow engineers/designers to input nominal design parameters to determine application feasibility and generate conceptual load pin designs/drawings quickly and effectively. All finalized designs/drawings will be completed and formalized by Strainsert.
(29) Direct replacement of standard clevis pins, shear pins, clevis bolts, load pins, shear axles, and many other types of pinned joints. CPA Series, Clevis Pin with Retaining Ring End CBA Series, Clevis Pin "Bolt" with Threaded End Measurement ranges from 1,500 to 800,000 lbs. Model CPA-1 (SS) X shown with Connector.
Direct replacement of wire rope pins in Crosby (or Equivalent) wire rope sockets, with minimal machining and hardware. Measurement ranges from 12,500 to 600,000 lbs. Model SPA-100 (SS) X shown.
(29) Direct replacement of standard Crosby and Skookum shackle pins. Anchor shackle: All models. Chain shackle: Most models. Measurement ranges from 2,000 to 220,000 lbs. Inquire for custom product ranges. Model RCP-1.000-B shown with Anchor Shackle, Bobbin, Keeper, Threaded Collar, and Permanently Attached Cable.
(11) Direct replacement of hydraulic actuator/cylinder pins, with minimal machining and hardware. Measurement ranges from 3,500 to 300,000 lbs. Inquire for custom product ranges.
