Strainsert offers a variety of Instrumentation options for building complete and custom force measurement solutions. Instrumentation options include simple displays, summing junctions, analog signal conditioning (0 to 10 VDC, 4 to 20 mA, etc.), industry standard digital interfaces (RS-232, RS-485, CAN, USB, etc.), and wireless telemetry. Other typical options include relay control and peak hold. Instrumentation sourcing includes Strainsert in-house, 3rd party, or customer specified.
Digital Strain Gage Modules (DSC) are compact, high performance strain gage digital signal conditioner modules. They are aimed at applications which require high measurement accuracy, resolution, and stability. The module and sensor may be powered by a typical DC power supply and communicates using standard or custom bus communications and protocols. Outputs include RS-232, RS-485, and CAN. Available protocols include ASCII, CAN, and Modbus.
The DSC may be mounted in several ways, including standard or custom enclosures.
Software tools are included for quick and convenient interfacing with device configuration, calibration, datalogging, and recording. A standard Windows DLL is provided for ...
The USB Strain Gage Module (DSCUSB) is a compact, high performance strain gage digital signal conditioner module with USB connectivity. It is aimed at applications which require high measurement accuracy, resolution, and repeatability. The module and sensor are powered by the host USB and will appear as a virtual COM port.
It is ideal for a single sensor application. However, multiple sensors may be connected using a suitable USB hub. The IP50 rated ABS plastic enclosure may be mounted in several ways. DIN rail mounting is available (part# D4).
Software tools are included for quick and convenient interfacing with the device for testing, configuration, calibration, datalogging, and recording. A standard Windows DLL ...
The MSI-8004HD features 1.5-inch high characters on its LED display. The display is available in either red/green or blue, allowing the controller to be clearly visible in many environments. The red/green display can be configured to change color based on weight and setpoint conditions, making the MSI-8004HD a natural fit for safety-critical industrial applications.
The milled anodized aluminum, IP65-rated enclosure is mountable in either a direct panel mount or included tilt stand. Strainsert’s digital weight indicators have advanced electronics and simple interface make it easy to set up and operate. It is designed to perform effectively in tough environments.
(42)
The Model SCD1 is a series of signal conditioners which provide bridge excitation, amplification, span and balance controls and a choice of ±10 Vdc and/or 4-20 ma outputs. Primary input power is available in 120 Vac or a variety of Vdc voltage levels.
The SCD1 can accommodate up to four channels with ±10 Vdc outputs or a maximum of 2 channels with 4-20 ma outputs.
Standard SCD1 models are packaged in a NEMA-12 rated cabinet (NEMA-4X packages are available).
Each input channel is connected via a six (6) pin receptacle (PT02A-10-6S)
All output signals are provided at a terminal strip inside the signal conditioner cabinet . Each output signal has an individual terminal connection ...
Model PLN-D2 is a single channel handheld load indicator. Indication is direct. No multipliers are required, thus avoiding ambiguous readings. Resolution is from 1 pound to 1000 pounds depending on the load capacity of the transducer. Alternate display units are available.
Operation is extremely simple. For normal use, only two controls are involved. Turn on the power switch, set zero load balance, and begin reading applied loads.
A calibration check function is included to provide a quick test of the transducer and instrument integrity.
The readout system is fully contained in a cast metal case that is both rugged and durable.
Power is provided by a set of rechargeable batteries. Batteries ...
(2)
The PLNX- line of indicators are 2 and 4 channel versions with the same basic circuitry and performance features as the Model PLN-D2. Additional features include different instrument cases, and switching provisions for one to four channels which accommodate up to four transducers.
Indication is direct. Resolution is from 1 pound to 1000 pounds, depending on full scale transducer capacity. Alternate display units are available.
Simple operation. For normal use only three controls are involved: Turn on the power switch, select the channel, set the no load balance or tare reading to zero, and begin reading applied loads.
A shunt calibration function provides a quick test of transducer and indicator ...
The Model PLND4 is a 4-1/2 digit indicator made for use with any full bridge strain gage type transducer. Indication is direct.
No multipliers are required. Simple operation. For normal use only two controls are involved: turn on the power switch, set the no load balance or tare reading to zero, and begin reading applied loads.
Alternate display units are available.
A calibration check function is included to provide a quick test of the transducer and instrument integrity.
The read out system is fully contained in a rugged and durable aluminum alloy case.
Power is provided by a set of rechargeable batteries. Batteries and a recharger, operable on 120 Vac or 240 Vac, are included ...
(9)
The Strainsert SJB Series Summing
Junction Boxes are for parallel averaging
of 2 to 4 similar transducers. The
standard SJB is available in a NEMA-
12 steel enclosure (NEMA-4X packages
are optionally available). The
NEMA-12 comes in both a connector
style and a cord grip style (NEMA-4X
available with cord grips only). Cord
grips accept cables with diameters
between 0.250” to 0.375” inches. The
removal of a gasket-tight lid enables
the user to make cable wire
connections to screw type terminal
blocks mounted on an internal
circuit board. Overall enclosure
dimension are 7.5” (L) x 4.25” (W)
x 3.5” (H).
