Search Catalog
        
 All Products    TLS, TLN and TLNS Series, Force Sensing Tension Links with Threaded Ends
All Products > Tension Links > TLS, TLN and TLNS Series, Force Sensing Tension Links with Threaded Ends > Item # TLS-150 SS  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # TLS-150 SS, TLS - External Threads both Ends






Specifications  · Performance Specs  · Electrical Specifications  · General Information

Specifications

Dimensional Drawing

Load Capacity
150 KIPS

Material
Stainless Steel 17-4, H-1025 (Standard)

Connector Type
Connector
Permanently Attached Cable

AS - Length
3 in

B - Width
2-1/2 in

C - Diameter
3 in

D - Diameter
1.957 in

E - Length
1-7/8 in

F - Length
1 in

G - Length
3-1/2 in

L - Overall Length
12-3/8 in

R - Radius
1/2 in

T - Thread Size
2-1/4-12N

Weight
15.5 lb

Safety Factor
2.6


Performance Specs

Overload without Zero Shift
150%

Bridge
Full bridge 350 Ohm (Nominal)

Excitation
12 V AC (Maximum)
12 V DC (Maximum)

Output Signal1
2-mV/V (Nominal)
2-mV/V (Standardized Output)

Non-Repeatability
0.10% FS

Non-Linearity
0.25% FS

Hysteresis
±0.15% FS

Temp Effects (on Zero)
0.003% FS / °F (Nominal)

Temp Effects (on Output)
0.003% load / °F (Nominal)

Zero Balance2
±2% FS (Nominal)

Static Overload
150% without zero or open shift
1 Exact output provided with calibration data. (Standardized outputs are optional).
2 Prior to loading, it is necessary to initially/periodically null the zero load output to account for any residual offset.


Electrical Specifications

Receptacle
PT02H-10-6P

Mating Plug
PT06A-10-6S (SR)

     Function
Pin

     (+) Excitation
A

     (-) Excitation
D

     (+) Signal
B

     (-) Signal
C

Cable
#20(26x34) AWG., rubber insulation, shielded, rubber jacket, 4-Conductor (Standard Cable)

     Function 
Wire Code

     (+) Excitation 
Red

     (-) Excitation 
Black

     (+) Signal 
Green

     (-) Signal 
White


General Information
Strainsert Tension Links are superior performance sensors, for use in weighing and force measuring applications.

Its sensing element consists of a strain gage bridge circuit internally installed in a small hole along its longitudinal axis. This unique arrangement provides a most effective means for the protection and sealing of the strain gage circuit while minimizing the adverse effects of extraneous torsional and flexural loads.

Tension Links can be modified for underwater use.


 MORE IMAGES 

·  TLSdim

·  Tension Links


 DOWNLOADS 

TLS Tension Link Ordering Information
(PDF, 220KB)



 Renewal Parts 


page100
Standard Cable

PT1H-10-6P
PT1H-10-6P
Transducer Receptacles

more available ..