Strainsert Co.
12 Union Hill Rd.,West Conshohocken, PA 19428
Phone: 610-825-3310
Fax: 610-825-1734
Toll-free: 800-529-1502
Email: tfoley@strainsert.com
Website: http://www.strainsert.com
All Products > Tension Links > TLLR/TLLF Series, Force Sensing Tension Links with Pivot Ends > Item # TLLR-200 SS  


Item # TLLR-200 SS, Pivot End at 90° Model Designation





Specifications  · Performance Specs  · Electrical Specifications  · General Information

Specifications

Dimensional Drawing

Load Capacity
200 KIPS

Material
Stainless Steel 17-4, H-1025 (Standard)

Connector Type
Connector
Permanently Attached Cable

A - Length
2-13/16 in

B - Width
2-3/4 in

C - Diameter
4-3/4 in

D - Diameter
2.249 in

E - Length
3-7/16 in

F - Length
2-1/4 in

G - Length
5-15/16 in

L - Overall Length
17-1/4 in

M - Length
11-5/8 in

R - Radius
1 in

T - Diameter
2-1/2 in

Weight
41 lb

Safety Factor
2.4


Performance Specs

Overload without Zero Shift
150%

Bridge
Full bridge 350 Ohm (Nominal)

Excitation
12 V AC (Maximum)
12 V DC (Maximum)

Output Signal1
2-mV/V (Nominal)
2-mV/V (Standardized Output)

Non-Repeatability
0.10% FS

Non-Linearity
0.25% FS

Hysteresis
±0.15% FS

Temp Effects (on Zero)
0.003% FS / °F (Nominal)

Temp Effects (on Output)
0.003% load / °F (Nominal)

Zero Balance2
±2% FS (Nominal)

Static Overload
150% without zero or open shift
1 Exact output provided with calibration data. (Standardized outputs are optional).
2 Prior to loading, it is necessary to initially/periodically null the zero load output to account for any residual offset.


Electrical Specifications

Receptacle
PT02H-10-6P

Mating Plug
PT06A-10-6S (SR)

     Function
Pin

     (+) Excitation
A

     (-) Excitation
D

     (+) Signal
B

     (-) Signal
C

Cable
#20(26x34) AWG., rubber insulation, shielded, rubber jacket, 4-Conductor (Standard Cable)

     Function 
Wire Code

     (+) Excitation 
Red

     (-) Excitation 
Black

     (+) Signal 
Green

     (-) Signal 
White


General Information
Strainsert Tension Links are superior performance sensors, for use in weighing and force measuring applications.

Its sensing element consists of a strain gage bridge circuit internally installed in a small hole along its longitudinal axis. This unique arrangement provides a most effective means for the protection and sealing of the strain gage circuit while minimizing the adverse effects of extraneous torsional and flexural loads.

Tension Links can be modified for underwater use.